How to set up the Logitech Rally Plus, from unboxing to a working test. It's a USB device: plug it into a laptop or room PC and it shows up as a camera, microphone and speaker in any meeting app.
Before you start: check the box
- Rally Camera
- Rally Display Hub
- Rally Table Hub
- Rally Speaker (x2)
- Rally Mic Pod (x2)
- Remote control
- USB-C to USB-C cable
- USB-A to USB-B cable
- CAT6A Ethernet cable
- HDMI cables (x2)
- AC cables (x2)
- Power supplies (x2)
- Documentation
What you need
- For USB mode: a laptop or room PC with a free USB port that matches the included cable. Plug directly into the computer rather than through a hub where possible.
Rally Plus at a glance
- Camera: 4K Ultra HD PTZ, pan ±90°, tilt +50°/-90°
- Microphones: 2 Rally Mic Pods included, expandable to 7 (8 beams each)
Step by step
-
Pick the position. Center the camera on the main display, just above or below the screen, at roughly seated eye level so people look at the camera when they look at the screen. See Rally Plus mounting and placement.
-
Connect power and cables. Connect the power adapter. Then connect the included cables. Use the cables in the box first; long runs may need the manufacturer's extender.
-
Set up USB mode. Connect the Rally Plus to the computer by USB. In Teams, Zoom or Meet, open the device settings and select the Rally Plus as the camera, microphone and speaker. In USB mode the video bar acts as the computer's camera, microphone and speaker (Logitech describes Appliance, USB and BYOD modes). Connect the bar to the laptop/room PC with the supplied USB cable (no unnecessary adapters or hubs), then pick the Logitech device as camera, microphone and speaker in the Teams/Zoom device settings.
-
Update the firmware. Update in the Logitech Sync app: select Rally, install any available update, then reboot the host computer and reopen Sync. How to update the Rally Plus
-
Run a test call. Join a test meeting, check framing from every seat, speak from the far end of the table, and have the remote side confirm they hear you clearly with no echo.
Logitech apps you'll use
- Logitech Sync Portal (cloud): inventory, remote settings, firmware updates and Local Network Access toggling for room devices
Manual and documentation
Logitech's user manual for the Rally Plus: open the PDF. Check it for exact port diagrams and admin settings for your firmware version; more guides are on the Logitech support site.
If something doesn't work
Start with Rally Plus troubleshooting. Want it done for you? We plan rooms and ship them ready to install. Get a quote.
More Rally Plus guides
- Rally Plus buyer's guide: specs and price
- Rally Plus: troubleshooting
- Rally Plus: firmware updates
- Rally Plus: mounting and placement
- Rally Plus: Teams, Zoom and Google Meet
- Rally Plus: what room size it covers
- Rally Plus: price and total room cost
- Rally Plus: full specs
- Rally Plus: alternatives compared
- Rally Plus: accessories
- Rally Plus: factory reset
- All Logitech room kits compared
Related guides
Outfitting several rooms, or reselling? Get a volume quote or apply for wholesale pricing →
