How to set up the Poly Studio X52, from unboxing to a working test. It works two ways: as an appliance that runs Teams Rooms, Zoom Rooms or another platform on the device itself, or in USB mode connected to a laptop or room PC, so it works with any meeting app.
Before you start: check the box
- Poly Studio X52
- Ethernet cable
- Monitor clamp
- AC power adapter
- Power cable
- HDMI cable
What you need
- Ports on the Studio X52: Video ports: 1 HDMI-in 2.0, 2 HDMI-out 2.0; USB / audio: 1 USB-C, 2 USB-A (5Gbps), 1 line in (optional microphone); Network: 1 RJ-45; Wireless: Wi-Fi 802.11a/b/g/n/ac/ax, Bluetooth 5.0.
- For appliance mode: a wired Ethernet drop (recommended over Wi-Fi), a display with HDMI input, a touch controller, and a Teams, Zoom or Google Meet account and license for the room.
- For USB mode: a laptop or room PC with a free USB port that matches the included cable. Plug directly into the computer rather than through a hub where possible.
Studio X52 at a glance
- Camera: 20 MP 4K UHD, single lens, 30 fps
- Microphones: Two MEMS + two second-order microphones, pickup up to 20 ft
Step by step
-
Pick the position. Center the camera on the main display, just above or below the screen, at roughly seated eye level so people look at the camera when they look at the screen. See Studio X52 mounting and placement.
-
Connect power and cables. Connect the power adapter. Then connect the cables your setup needs (Video ports: 1 HDMI-in 2.0, 2 HDMI-out 2.0; USB / audio: 1 USB-C, 2 USB-A (5Gbps), 1 line in (optional microphone); Network: 1 RJ-45). Use the cables in the box first; long runs may need the manufacturer's extender.
-
Pair a phone (optional). Put it in Bluetooth pairing mode (see the quick start guide for the button) and pick it on your phone. Bluetooth is for calls from a phone or tablet; for meetings on a computer, USB is more reliable.
-
Set up appliance mode. Connect a monitor to HDMI 1, Ethernet and any USB cameras before powering on, then note the IP address and default credentials shown on screen. The system defaults to Poly Video mode; choose Teams Rooms, Zoom Rooms or Google Meet during out-of-box setup or later under General Settings > Provider (requires that provider's account and license; only Teams and Zoom support Wi-Fi as primary network).
-
Set up USB mode. Connect the Studio X52 to the computer by USB. In Teams, Zoom or Meet, open the device settings and select the Studio X52 as the camera, microphone and speaker. Studio X systems can act as a USB peripheral via Poly Device Mode: set General Settings > Provider to Device Mode (or enable access to Device Mode), connect the computer by USB and choose the Poly camera and audio in the conferencing app.
-
Update the firmware. Studio X systems update from the web interface (General Settings > Device Management > Check for Updates / Enable Automatic Updates) or from a FAT32 USB flash drive with the package downloaded from Poly Lens. See Updating the firmware below.
-
Run a test call. Join a test meeting, check framing from every seat, speak from the far end of the table, and have the remote side confirm they hear you clearly with no echo.
Updating the firmware
Studio X systems update from the web interface (General Settings > Device Management > Check for Updates / Enable Automatic Updates) or from a FAT32 USB flash drive with the package downloaded from Poly Lens. Systems onboarded to Poly Lens update automatically overnight; in Teams Rooms mode updates can be handed to Microsoft Teams Device Management. USB peripherals update via Poly Lens Desktop or Windows Update.
Tools:
-
Poly VideoOS system web interface: full configuration of Studio X/G series (browse to device IP)
-
Poly Lens (cloud, lens.poly.com): onboarding, software versions/downloads, update policies
-
Poly Clariti Manager / provisioning server: bulk provisioning and updates
-
Don't unplug power or USB while an update runs.
-
Close Teams, Zoom and other apps that use the device before updating it from a computer.
-
Update one room first, test a call, then roll out to the rest.
Manual and documentation
Poly's user manual for the Studio X52: open the PDF. Check it for exact port diagrams and admin settings for your firmware version; more guides are on the Poly support site.
If something doesn't work
Start with Studio X52 troubleshooting. Want it done for you? We plan rooms and ship them ready to install. Get a quote.
More Studio X52 guides
- Studio X52 buyer's guide: specs and price
- Studio X52: troubleshooting
- Studio X52: mounting and placement
- Studio X52: Teams, Zoom and Google Meet
- Studio X52: what room size it covers
- Studio X52: price and total room cost
- Studio X52: full specs
- Studio X52: alternatives compared
- Studio X52: accessories
- Studio X52: factory reset
- Studio X52: admin login and settings
- All Poly video bars compared
Related guides
Outfitting several rooms, or reselling? Get a volume quote or apply for wholesale pricing →
