How to set up the Jabra Evolve2 85, from unboxing to a working test. It's a business headset: connect it by USB cable or dongle (or Bluetooth) and select it as the microphone and speaker in Teams, Zoom, Meet or your softphone.
Before you start: check the box
- Headset
- Jabra Link 390 BT adapter
- USB-C to USB-A cable 1.2m
- 3.5mm audio cable 1.2m
- Carry case
- Desk stand (SKU dependent)
- Safety leaflets
What you need
- Ports on the Evolve2 85: USB-A/USB-C Bluetooth adapter, 3.5mm jack, Bluetooth 5.0.
- A computer with a free USB port (or the USB adapter in the box). Plug directly into the computer rather than through a hub where possible.
Evolve2 85 at a glance
- Microphones: 4 analog + 6 digital MEMS
- Talk time: Up to 26hrs (ANC/busylight off) / up to 21hrs (on)
Step by step
-
Fit it. Adjust the headband and boom so the microphone sits about two fingers from the corner of your mouth.
-
Charge and connect it. Charge the Evolve2 85 fully, then connect it to the computer with the USB cable or the Bluetooth dongle. It runs on battery or USB power.
-
Pair a phone (optional). Put it in Bluetooth pairing mode (see the quick start guide for the button) and pick it on your phone. Bluetooth is for calls from a phone or tablet; for meetings on a computer, USB is more reliable.
-
Set up USB mode. Connect the Evolve2 85 to the computer by USB. In Teams, Zoom or Meet, open the device settings and select the Evolve2 85 as the microphone and speaker. Connect the camera or speakerphone to the PC with the supplied USB cable and select the Jabra device as camera, microphone and speaker in Teams/Zoom. Install Jabra Direct to check for firmware and change settings.
-
Update the firmware. Jabra recommends updating to the latest firmware before first use. See Updating the firmware below.
-
Make a test call. Make a test call and ask the other side whether you're clear and at a good level; check mute sync between the headset and the app.
Updating the firmware
Jabra recommends updating to the latest firmware before first use.
Tools:
-
Jabra Direct (PC): firmware updates and settings for USB cameras and speakerphones
-
Jabra Plus (Management): cloud room management, firmware policy per room configuration
-
Jabra Xpress: IT mass deployment of settings and firmware
-
Don't unplug power or USB while an update runs.
-
Close Teams, Zoom and other apps that use the device before updating it from a computer.
-
In a big rollout, update one device first, make a test call, then roll out to everyone else.
Manual and documentation
Jabra's product page for the Evolve2 85: documentation and downloads. Check it for exact port diagrams and admin settings for your firmware version; more guides are on the Jabra support site.
If something doesn't work
Start with Evolve2 85 troubleshooting. Want it done for you? We plan rooms and ship them ready to install. Get a quote.
More Evolve2 85 guides
- Evolve2 85 buyer's guide: specs and price
- Evolve2 85: troubleshooting
- Evolve2 85: Teams, Zoom and Google Meet
- Evolve2 85: price and what else you need
- Evolve2 85: full specs
- Evolve2 85: alternatives compared
- Evolve2 85: accessories
- All Jabra business headsets compared
Related guides
Outfitting several rooms, or reselling? Get a volume quote or apply for wholesale pricing →
