Guide

How to set up the Logitech Rally Mic Pod 2

Updated

How to set up the Logitech Rally Mic Pod 2, from unboxing to a working test. It adds microphones to the Rally Board 65 and Rally Bar 2, which also handles its power, settings and firmware.

How to set up the Logitech Rally Mic Pod 2
Set up the Logitech Rally Mic Pod 2: what you need, cabling, connecting to the host, firmware and a test.

Before you start: check the box

  • Rally Mic Pod 2
  • Documentation

What you need

  • Ports on the Rally Mic Pod 2: Interfaces: RJ45 in, RJ45 out; Cabling: Shielded Cat5e up to 40 m or Cat6 up to 70 m to host.
  • A host system: the Rally Board 65 and Rally Bar 2.

Step by step

  1. Place it on the table. Put it toward the far end of the table, where people sit beyond the built-in microphones; each one picks up about 24 ft (7.2 m). Keep it clear of laptops and papers.

  2. Connect it to the host. Connect it with the included cable to the Rally Board 65 and Rally Bar 2 (or its mic hub). The host powers it; there's no separate power supply. Check the host's limit on how many you can add.

  3. Add it to the room system. With the host powered on, the Rally Mic Pod 2 is detected automatically. Check the host's settings or admin portal lists it, then set it as part of the room audio.

  4. Update the firmware. The Rally Mic Pod 2 updates with its host (Rally Board 65 and Rally Bar 2). See Updating the firmware below.

  5. Run a test call. Join a test meeting, talk from the farthest seat, and ask the far end whether you're clear, at a good level and without echo.

Updating the firmware

The Rally Mic Pod 2 updates with its host (Rally Board 65 and Rally Bar 2). Update the host system and the microphone updates with it.

Tools:

  • Logitech Sync Portal (cloud): inventory, remote settings, firmware updates and Local Network Access toggling for room devices

  • Don't unplug the host while an update runs.

  • Update one room first, test a call, then roll out to the rest.

Manual and documentation

Logitech's user manual for the Rally Mic Pod 2: open the PDF. Check it for exact port diagrams and admin settings for your firmware version; more guides are on the Logitech support site.

If something doesn't work

Start with Rally Mic Pod 2 troubleshooting. Want it done for you? We plan rooms and ship them ready to install. Get a quote.

More Rally Mic Pod 2 guides

Related guides

All setup guides →

Outfitting several rooms, or reselling? Get a volume quote or apply for wholesale pricing →

Popular right now

Popular picks

Get a quote